Distributor Site – Americas

Distributor Site – Europe

Facebook-f Twitter Linkedin-in

Americas
+1 732-868-1372

Europe
+44 (0)1962 711661

Asia-Pacific
+86 21 5773 4913

Permabond 943

PERMABOND 943 Low Odor Cyanoacrylate Adhesive

Permabond 943 is a low odor, non-fogging, non-frosting alkoxyethyl cyanoacrylate. The reduced odor improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate adhesives on hot and humid days, is eliminated. The elimination of fogging improves the production rate of acceptable parts as well as their appearance. The adhesive is very stable and will provide optimum performance for one year when refrigerated.

Features and Benefits

  • Low odor for improved worker comfort
  • Non-frosting –good aesthetic appearance
  • Ease of use – no mixing or heat cure
  • Bonds most materials
  • 100% reactive, no solvents

Cyanoacrylate Directions for Use Video

Surface Preparation Directions for Use Video

Technical Data Sheet

Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive.  Permabond 943 develops strong bonds extremely fast and on a great variety of materials. These properties make PERMABOND cyanoacrylates the ideal adhesives for high-speed production lines.

Surface Preparation prior to bonding with Permabond 940

Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminum, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.

Permabond 940 Directions for Use

1) Apply the adhesive sparingly to one surface.
2) Then bring the components together quickly and correctly aligned.
3) Apply sufficient pressure to ensure the adhesive spreads into a thin film.
4) Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.
5) Remove any surplus adhesive with Permabond CA solvent, nitromethane or acetone.

NB: For difficult or porous surfaces using a Permabond activator is recommended. If bonding polypropylene, polyethylene, PTFE, or silicone, prime first with Permabond Polyolefin Primer (POP).

For more information, download the Technical Data Sheet.

Contáctenos

Productos

Soporte técnico

Permabond le ayudará a elegir el adhesivo correcto para su aplicación.

Encontrar un distribuidor

Los productos Permabond se comercializan a través de distribuidores en todo el mundo.

Certificado ISO

Permabond es una compañía que cuenta con la certificación ISO QMS Certified.

Blogs recientes