Permabond A131
PERMABOND A131 Anaerobic Thread Sealant
Features and Benefits
- Excellent chemical resistance
- Vibration resistant
- Lubricates threads for easier assembly
- Provides corrosion protection
- WRAS listed for contact with wholesome (potable) water


Surface Preparation
Anaerobic adhesives will tolerate a slight degree of surface contamination; however, for best results clean, dry, and degrease surfaces. Use a suitable solvent-based cleaner (such as acetone or isopropanol.)
In general, roughened surfaces (~25μm) give higher bond strengths than polished or ground surfaces.
To reduce the curing time, especially on inactive surfaces (such as zinc, aluminium and stainless steel), consider Permabond A905 or ASC10.
Directions for Use
1) Apply a continuous bead circumferentially 1-2 threads from the leading edge.
2) Ensure you’ve applied sufficient amount to give a complete seal.
3) For taper/parallel threads, position the adhesive where the threads will fully engage. Gaps, and therefore cure times, may be greater than expected with this joint configuration.
4) Tighten with normal tools.
For more information, download the Technical Data Sheet.
Contactez-nous
Produits
Assistance technique

Permabond vous aidera à sélectionner la colle qui convient à votre application.
Pour trouver un distributeur

s produits Permabond sont vendus par l'intermédiaire de distributeurs dans le monde entier.
Permabond est certifié ISO QMS compagnie.

Vous pouvez obtenir une copie de notre certificat ISO