Permabond 240
PERMABOND 240 Ethyl Cyanoacrylate Adhesive
Permabond 240 is a high viscosity product useful in large gap applications. It is ideal for porous substrates. It is fast setting and suitable for use on plastics, rubber and metals.
Features and Benefits
- Rapid development of high strength
- Ease of use – no mixing or heat cure
- Bonds most materials
- 100% reactive, no solvents
- Approved to MIL-A-46050C Type II Class 3 (existing designs)
Surface Preparation prior to bonding with Permabond 240
Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminum, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.
Permabond 240 Directions for Use
1) Apply the adhesive sparingly to one surface.
2) Then, bring the components together quickly and correctly aligned.
3) Apply sufficient pressure to ensure the adhesive spreads into a thin film.
4) Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.
5) Remove any surplus adhesive with Permabond CA solvent, nitromethane, or acetone.
NB: For difficult or porous surfaces using a Permabond activator is recommended. If bonding polypropylene, polyethylene, PTFE, or silicone, prime first with Permabond Polyolefin Primer (POP).
For more information, download the Technical Data Sheet.
Contactez-nous
Produits
Assistance technique
Permabond vous aidera à sélectionner la colle qui convient à votre application.
Pour trouver un distributeur
s produits Permabond sont vendus par l'intermédiaire de distributeurs dans le monde entier.
Permabond est certifié ISO QMS compagnie.
Vous pouvez obtenir une copie de notre certificat ISO
