Permabond A131 is an anaerobic adhesive that seals threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water. Suitable for use on both parallel and tapered threads, the delayed cure allows accurate alignment of components. Capable of giving an instant pressure seal and not drying out like many mastics, re-work can effectively be eliminated. Should disassembly be necessary, this can be accomplished using normal tools.
Features and Benefits
Excellent chemical resistance
Vibration resistant
Lubricates threads for easier assembly
Provides corrosion protection
WRAS listed for contact with wholesome (potable) water
Surface Preparation Anaerobic adhesives will tolerate a slight degree of surface contamination; however, for best results clean, dry, and degrease surfaces. Use a suitable solvent-based cleaner (such as acetone or isopropanol.)
In general, roughened surfaces (~25μm) give higher bond strengths than polished or ground surfaces.
To reduce the curing time, especially on inactive surfaces (such as zinc, aluminium and stainless steel), consider Permabond A905 or ASC10.
Directions for Use 1) Apply a continuous bead circumferentially 1-2 threads from the leading edge.
2) Ensure you’ve applied sufficient amount to give a complete seal.
3) For taper/parallel threads, position the adhesive where the threads will fully engage. Gaps, and therefore cure times, may be greater than expected with this joint configuration.
4) Tighten with normal tools.
For more information, download the Technical Data Sheet.
