PERMABOND TA4610 is a 2-part, 1:1 toughened acrylic adhesive. It has been developed to bond low surface energy plastics such as polypropylene and polyethylene – with no primer or surface treatment required. It can also be used to bond a wide variety of other materials, such as metals and composite materials, and is ideal for bonding dissimilar surfaces.
Permabond TA4610 Features & Benefits
1) Surfaces must be clean, dry, and grease-free prior to bonding.
2) Apply a thin bead of adhesive pre-mixed through a static mixer nozzle.
3) Assemble components and clamp.
4) Maintain pressure until handling strength is achieved. The time will vary depending on the joint design and substrates.
5) Allow 24-36 hours for the adhesive to fully cure.
NB: Adhesive outside of a closed joint (i.e. excess material) will cure more slowly and may feel soft due to air contact. Adhesive inside the joint will cure solid.
Please download the flyer of the full line of low surface energy bonding adhesives here.
