{"id":1516,"date":"2015-01-15T23:53:50","date_gmt":"2015-01-15T23:53:50","guid":{"rendered":"https:\/\/permabond.com\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/"},"modified":"2025-02-25T07:18:38","modified_gmt":"2025-02-25T07:18:38","slug":"troubleshooting-twopart-epoxy-adhesive-dispensing-issues","status":"publish","type":"post","link":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/","title":{"rendered":"Troubleshooting Two-part Epoxy Adhesive Dispensing Issues"},"content":{"rendered":"<h2><b>Manual Dispensing from Cartridge<\/b><\/h2>\n<p>Epoxy dispensing manually from a cartridge is common. Simply remove the cap from the cartridge. Then affix the recommended nozzle onto the cartridge. Make sure to purge the nozzle as the new cartridge will likely have slightly unbalanced pistons, resulting in the first squeeze of adhesive being resin or hardener rich (this affects curing and strength properties). Dispense about an inch onto paper towel to ensure proper mix.<\/p>\n<p>TIP\u2013 When you remove the cap you can normally see on the stoppers a coating of adhesive. Remember which prong goes into which side if you want to put the cap back on. Otherwise, it will become bonded on if you cross-contaminate.<\/p>\n<p>TIP &#8211; Some customers are tempted to use shorter nozzles to minimize wastage. But epoxy adhesives are very sensitive to proper mixing, so this is not recommended.<\/p>\n<p>Pay attention to the \u201cPot Life\u201d (found on the <a href=\"https:\/\/permabond.com\/products\/epoxies-two-part-epoxy-adhesives\/\" target=\"_blank\" rel=\"noopener\">two-part epoxy<\/a> adhesive product technical datasheet) and also the ambient temperature you are working in. This will give you an indication of nozzle life for your <a href=\"https:\/\/permabond.com\/products\/epoxies-two-part-epoxy-adhesives\/\" target=\"_blank\" rel=\"noopener\">two-part epoxy<\/a> adhesive. For example, for a product with a 10 minute pot life at 23\u00b0C, you must use the adhesive (or purge the nozzle) within 10 minutes. If you are working in a very hot environment, the cure time would be a lot faster \u2013 e.g. at 31\u00b0C, the nozzle may only have 5 minutes life before the adhesive gels inside.\u00a0 Keeping the adhesive cool is one way of extending the nozzle life \u2013 but this brings other problems\u2026<\/p>\n<h2>Cold Dispensing Conditions<\/h2>\n<p>Adhesive thickens when cold, so if you store epoxy in refrigerated conditions or are working in a cold environment, it will become a lot more difficult to dispense. Some high viscosity grades may become virtually impossible to dispense from a cartridge.\u00a0 In this case you can warm the adhesive to reduce the viscosity to something more workable. However, don\u2019t forget warmer adhesive will cure faster in the nozzle \u2013 but hey, at least you got it in there!<\/p>\n<h2>Common Two-part Epoxy Adhesive Dispensing Problems<\/h2>\n<p>Adhesive not coming out of cartridge:<\/p>\n<ul>\n<li>Check \u2013 has the cap been removed? Is there any sort of seal which requires piercing?<\/li>\n<li>Back of cartridge is still sealed \u2013 sometimes cartridges have a foil seal you can pull off. Beneath this are pistons, these should be fairly level and not leaking.<\/li>\n<li>Without putting the nozzle on, try to dispense some adhesive directly from the mouth of the cartridge.<\/li>\n<li>If nothing is coming out, unfurl a paper clip and poke it into the mouth of the cartridge. Use a separate one for resin and hardener so you do not cross-contaminate. It will be apparent if the adhesive has gone hard or has become really thick.<\/li>\n<li>If it has gone thick, you can warm it and then see if you can dispense. If not, it could be time to get some fresh stock.<\/li>\n<li>If the epoxy adhesive is still liquid and doesn\u2019t come out, check you are using the right gun with plungers that fit the back piston of the cartridges correctly.\u00a0 If the adhesive does come out without the nozzle but won\u2019t go through the nozzle, it could be either a blocked nozzle or too high a viscosity for the nozzle creating too much back-pressure.<\/li>\n<li>Sometimes cartridges are just really hard to dispense by hand unless you\u2019re Popeye or Arnold Schwarzenegger, in which case one that is fed by pressurized air would solve the problem.<\/li>\n<\/ul>\n<h2><b>Automatic Dispensing Equipment<\/b><\/h2>\n<p>If set-up and used correctly, there shouldn\u2019t be any problems with using two part epoxy adhesives through dispensing equipment. Normally the dispensing equipment provider will assess the viscosity and thixotropy measurements, as well as mix ratio information from the adhesive datasheet, before designing and installing a system.<\/p>\n<p>However, it is not unknown for production line operatives to \u201cfiddle\u201d with settings (such as the air pressure gauge, mix ratio settings etc.). This can result in dispensed material of incorrect mix ratio.<\/p>\n<p>If material is not dispensing at all then check:<\/p>\n<ul>\n<li>Machine is fully switched on, timer \/ foot pedal is plugged in etc.<\/li>\n<li>The compressed airline is properly attached (and the compressor the other end is working!)<\/li>\n<li>There are no blockages in the nozzles, valves and other components of the dispensing equipment<\/li>\n<li>Dip tubes are properly inserted and the adhesive level is high enough<\/li>\n<li>There is adhesive in the machine<\/li>\n<li>Any pressure pots have no leaks under vacuum or extraneous objects caught in the seal.<\/li>\n<\/ul>\n<h2>Top Two-part Epoxy Adhesive Dispensing Tips<\/h2>\n<ul>\n<li>Don\u2019t muddle up resin and hardener. Keep them separate and make sure operators are aware it is a two component adhesive. Never let the resin and hardener come into contact unless you are mixing\/applying \u2013 do not muddle up tubing, dip tubes, reservoirs, spatulas or palette knives.<\/li>\n<li>After use, remove parts from dispensing equipment for cleaning \u2013 e.g. the mixing head, anywhere the two-part epoxy adhesive will have mixed.<\/li>\n<li>You can leave disposable mixing nozzles to cure on the machine and then replace them, when you are ready to start the next day.<\/li>\n<li>Most two-part epoxies have different colored resin and hardener so it is possible to see the cross-pigmentation and level of mixing. Successful mixing will result in a homogenous product with no streaking and no air bubbles.<\/li>\n<\/ul>\n<p>For further help, please contact the Permabond technical team <a href=\"https:\/\/permabond.com\/contact-us\">here<\/a>.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Manual Dispensing from Cartridge Epoxy dispensing manually from a cartridge is common. Simply remove the cap from the cartridge. Then affix the recommended nozzle onto the cartridge. Make sure to purge the nozzle as the new cartridge will likely have slightly unbalanced pistons, resulting in the first squeeze of adhesive being resin or hardener rich [&hellip;]<\/p>\n","protected":false},"author":5,"featured_media":11855,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[804,613],"tags":[139,131,132,133,101,135,140,106,141,142],"class_list":["post-1516","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-adhesive-selection-and-use-fr","category-troubleshooting-2","tag-2-component-epoxy","tag-automated-dispensing","tag-automatic-dispensing","tag-dispensing-gun","tag-epoxy-adhesive","tag-manual-dispensing","tag-mixing-nozzle","tag-two-part-epoxy","tag-two-part-epoxy-adhesive","tag-two-part-epoxy-adhesive-dispensing"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.3 (Yoast SEO v27.3) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Troubleshooting Two-part Epoxy Adhesive Dispensing Issues<\/title>\n<meta name=\"description\" content=\"Solutions to almost any two-part epoxy adhesive dispensing problem for manual or automatic dispensing and dispensing tips.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/\" \/>\n<meta property=\"og:locale\" content=\"pt_BR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Troubleshooting Two-part Epoxy Adhesive Dispensing Issues\" \/>\n<meta property=\"og:description\" content=\"Solutions to almost any two-part epoxy adhesive dispensing problem for manual or automatic dispensing and dispensing tips.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/\" \/>\n<meta property=\"og:site_name\" content=\"Permabond\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/permabondEA\/\" \/>\n<meta property=\"article:published_time\" content=\"2015-01-15T23:53:50+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2025-02-25T07:18:38+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"450\" \/>\n\t<meta property=\"og:image:height\" content=\"250\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Laurie Gibbons\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@PermabondEA\" \/>\n<meta name=\"twitter:site\" content=\"@PermabondEA\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"Laurie Gibbons\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. tempo de leitura\" \/>\n\t<meta name=\"twitter:data2\" content=\"4 minutos\" \/>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Troubleshooting Two-part Epoxy Adhesive Dispensing Issues","description":"Solutions to almost any two-part epoxy adhesive dispensing problem for manual or automatic dispensing and dispensing tips.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/","og_locale":"pt_BR","og_type":"article","og_title":"Troubleshooting Two-part Epoxy Adhesive Dispensing Issues","og_description":"Solutions to almost any two-part epoxy adhesive dispensing problem for manual or automatic dispensing and dispensing tips.","og_url":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/","og_site_name":"Permabond","article_publisher":"https:\/\/www.facebook.com\/permabondEA\/","article_published_time":"2015-01-15T23:53:50+00:00","article_modified_time":"2025-02-25T07:18:38+00:00","og_image":[{"width":450,"height":250,"url":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","type":"image\/jpeg"}],"author":"Laurie Gibbons","twitter_card":"summary_large_image","twitter_creator":"@PermabondEA","twitter_site":"@PermabondEA","twitter_misc":{"Escrito por":"Laurie Gibbons","Est. tempo de leitura":"4 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/#article","isPartOf":{"@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/"},"author":{"name":"Laurie Gibbons","@id":"https:\/\/permabond.local\/#\/schema\/person\/ee2cd0b49e7331ee4adc67eafbdc21f6"},"headline":"Troubleshooting Two-part Epoxy Adhesive Dispensing Issues","datePublished":"2015-01-15T23:53:50+00:00","dateModified":"2025-02-25T07:18:38+00:00","mainEntityOfPage":{"@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/"},"wordCount":893,"publisher":{"@id":"https:\/\/permabond.local\/#organization"},"image":{"@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/#primaryimage"},"thumbnailUrl":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","keywords":["2-component epoxy","automated dispensing","automatic dispensing","dispensing gun","Epoxy Adhesive","manual dispensing","mixing nozzle","two part epoxy","Two-part Epoxy Adhesive","Two-part Epoxy Adhesive Dispensing"],"articleSection":["Adhesive Selection and Use","Troubleshooting"],"inLanguage":"pt-BR"},{"@type":"WebPage","@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/","url":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/","name":"Troubleshooting Two-part Epoxy Adhesive Dispensing Issues","isPartOf":{"@id":"https:\/\/permabond.local\/#website"},"primaryImageOfPage":{"@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/#primaryimage"},"image":{"@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/#primaryimage"},"thumbnailUrl":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","datePublished":"2015-01-15T23:53:50+00:00","dateModified":"2025-02-25T07:18:38+00:00","description":"Solutions to almost any two-part epoxy adhesive dispensing problem for manual or automatic dispensing and dispensing tips.","breadcrumb":{"@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/#breadcrumb"},"inLanguage":"pt-BR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/"]}]},{"@type":"ImageObject","inLanguage":"pt-BR","@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/#primaryimage","url":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","contentUrl":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","width":450,"height":250},{"@type":"BreadcrumbList","@id":"https:\/\/permabond.com\/pt-br\/troubleshooting-twopart-epoxy-adhesive-dispensing-issues\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/permabond.local\/pt-br\/"},{"@type":"ListItem","position":2,"name":"Troubleshooting Two-part Epoxy Adhesive Dispensing Issues"}]},{"@type":"WebSite","@id":"https:\/\/permabond.local\/#website","url":"https:\/\/permabond.local\/","name":"Permabond","description":"Permabond is a global leading manufacturer of Anaerobics, Cyanoacrylates, Epoxies, Acrylics, MS Polymers, Modified Epoxies, UV and Polyurethane Adhesives.","publisher":{"@id":"https:\/\/permabond.local\/#organization"},"alternateName":"Permabond Engineering Adhesives","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/permabond.local\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"pt-BR"},{"@type":"Organization","@id":"https:\/\/permabond.local\/#organization","name":"Permabond Engineering Adhesives","alternateName":"Permabond","url":"https:\/\/permabond.local\/","logo":{"@type":"ImageObject","inLanguage":"pt-BR","@id":"https:\/\/permabond.local\/#\/schema\/logo\/image\/","url":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/09\/permabond-logo-BLUE-1.png","contentUrl":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/09\/permabond-logo-BLUE-1.png","width":1371,"height":243,"caption":"Permabond Engineering Adhesives"},"image":{"@id":"https:\/\/permabond.local\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/permabondEA\/","https:\/\/x.com\/PermabondEA","https:\/\/www.linkedin.com\/company\/permabond-engineering-adhesives"]},{"@type":"Person","@id":"https:\/\/permabond.local\/#\/schema\/person\/ee2cd0b49e7331ee4adc67eafbdc21f6","name":"Laurie Gibbons","image":{"@type":"ImageObject","inLanguage":"pt-BR","@id":"https:\/\/secure.gravatar.com\/avatar\/ef30a45eda5c8ff1e3f4c6288df66f8a58ab5b054fecced621a7c58e0e6fe4ba?s=96&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/ef30a45eda5c8ff1e3f4c6288df66f8a58ab5b054fecced621a7c58e0e6fe4ba?s=96&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/ef30a45eda5c8ff1e3f4c6288df66f8a58ab5b054fecced621a7c58e0e6fe4ba?s=96&r=g","caption":"Laurie Gibbons"},"description":"Laurie has worked in the adhesive industry for over 30 years. With backgrounds in formulating, technical support, quality, sales, management, and marketing, her well-rounded experience supports Permabond clients and the Permabond team.","jobTitle":"Business Development Manager"}]}},"_links":{"self":[{"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/posts\/1516","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/comments?post=1516"}],"version-history":[{"count":0,"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/posts\/1516\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/media\/11855"}],"wp:attachment":[{"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/media?parent=1516"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/categories?post=1516"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/permabond.com\/pt-br\/wp-json\/wp\/v2\/tags?post=1516"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}