{"id":1771,"date":"2009-10-29T12:56:35","date_gmt":"2009-10-29T12:56:35","guid":{"rendered":"https:\/\/permabond.com\/help-ive-got-air-in-the-bond-line\/"},"modified":"2023-07-18T12:46:08","modified_gmt":"2023-07-18T12:46:08","slug":"help-ive-got-air-in-the-bond-line-causing-adhesive-failure","status":"publish","type":"post","link":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/","title":{"rendered":"Help! I\u2019ve got air in the bond line!"},"content":{"rendered":"<p>The adhesive failure troubleshooting process begins with a thorough knowledge of the processes leading up to and including the application of the <a href=\"https:\/\/permabond.com\/\">adhesive<\/a>.<\/p>\n<p>There are many possible causes for failure of bonded components. Before suspecting air in the bond line as the source of failure, double-check the adhesive selection, the application process, and the working environment. Make any necessary corrections.<br \/>\n<!--more--><br \/>\nCarefully examining the bond areas may provide clues to the cause and possible solution. When using adhesives or translucent substrates, trapped air pockets can be easily found by visual inspection of parts.<\/p>\n<p>The difficulty of determining if air in the bond line is the source of the bond (or seal) failure can be difficult when the substrates are opaque.<\/p>\n<h2>Adhesive Failure From Air Entrapment<\/h2>\n<p>Using your knowledge of the entire process, determine where the air is coming from. The four primary causes of air in a bond line are:<\/p>\n<ul>\n<li><strong>Insufficient Adhesive<\/strong><\/li>\n<li><strong>Dispensing<\/strong><\/li>\n<li><strong>Entrapment<\/strong><\/li>\n<li><strong>Separation<\/strong><\/li>\n<\/ul>\n<h3><strong><br \/>\nInsufficient Adhesive<\/strong><\/h3>\n<ul>\n<li>Shrinkage&#8212; Most adhesives shrink to some degree. Generally, the adhesive will shrink in a direction approaching the cure mechanism. For example, the adhesive closest to the UV light source will cure first. Then the adhesive furthest from the light will be pulled toward the cure. Examine the failed parts for evidence of shrinkage, and adjust the amount of adhesive or cure process accordingly.<\/li>\n<li>Flow\u2014The adhesive may slump or flow out of the desired location before cure. If the product is cured with heat, the heat can reduce the viscosity causing flow prior to the onset of curing. Examine the failed parts for evidence of inconsistent flow. Implement process controls to manage variables of positioning parts and applying heat to cure. Or switch to a heat cure epoxy that is designed not to flow.<\/li>\n<li>Static displacement \u2013 Some manufacturing lines can produce sufficient static to cause the adhesive to defy gravity and leap away from the intended area. This is rare but can be seen on large plastic components. Obtain recommendations for reducing or eliminating static from engineering.<\/li>\n<\/ul>\n<h3><strong>Storage, Handling &amp; Dispensing &#8211; <\/strong><strong>Avoid introducing air into the adhesive system using this checklist to prevent adhesive bond failure.<br \/>\n<\/strong><\/h3>\n<ul>\n<li>Packaging, shipping \u2013 store product in the upright position and avoid shaking.<\/li>\n<li>Loading the dispenser \u2013 depending on the product viscosity, pour <a href=\"https:\/\/permabond.com\/\">adhesive <\/a>slowly into vessel, or use a pressure pot that accepts the adhesive package.<\/li>\n<li>If using an air pressure\/ time dispenser, minimize pressure to avoid bubbling air through the adhesive.<\/li>\n<li>If using a suck back valve, minimize the return so the dispensing process begins with adhesive, (not air).<\/li>\n<\/ul>\n<h3><strong>Entrapment<\/strong><\/h3>\n<ul>\n<li>If the dispense pattern overlaps, an air pocket may form under the second layer of adhesive. Modify the dispensing pattern to avoid overlapping layers of adhesive.<\/li>\n<li>For large surface areas, dispense in a serpentine manner. Avoid dispensing circles of adhesive as it will trap air in the center.<\/li>\n<li>Consider adding an air release path into the joint design, such as a tapered tongue in a tongue and groove joint.<\/li>\n<li>Assembly technique for flat surface-to-surface bonding is key to success. Mate two flat components in the way you close a book, rather than stacking one component on top of the other part.<\/li>\n<\/ul>\n<h3><strong>Separation<\/strong><\/h3>\n<p>If, upon close examination, the adhesive appears striated, separation prior to cure has likely occurred. This can happen when two pieces are assembled under pressure. When the pressure is removed before achieving full cure, the adhesive which was squeezed thin may cling to each piece but no longer fill the space between the two.<\/p>\n<p>In summary, there are a number of possible sources of air in a bond line. The solution may be as simple as changing a dispense pattern to avoid entrapment or modifying the assembly process. The manufacturer of dispensing equipment or the adhesive manufacturer is qualified to assist in troubleshooting.<\/p>\n<p>For further help and advice, please <a href=\"https:\/\/permabond.com\/contact-us\" target=\"_blank\" rel=\"noopener\">contact<\/a> Permabond.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>The adhesive failure troubleshooting process begins with a thorough knowledge of the processes leading up to and including the application of the adhesive. There are many possible causes for failure of bonded components. Before suspecting air in the bond line as the source of failure, double-check the adhesive selection, the application process, and the working [&hellip;]<\/p>\n","protected":false},"author":5,"featured_media":11855,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[806,613],"tags":[258,42,129,259],"class_list":["post-1771","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-adhesive-selection-and-use-es","category-troubleshooting-2","tag-adhesive-system","tag-adhesives","tag-industrial-adhesives","tag-insufficient-adhesive"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO Premium plugin v27.4 (Yoast SEO v27.4) - https:\/\/yoast.com\/product\/yoast-seo-premium-wordpress\/ -->\n<title>Air entrapment in adhesive bonds | Adhesive Failure<\/title>\n<meta name=\"description\" content=\"Before suspecting air in the bond line as the source of failure, check the adhesive selection, application process, and working environment.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/\" \/>\n<meta property=\"og:locale\" content=\"de_DE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Help! I\u2019ve got air in the bond line!\" \/>\n<meta property=\"og:description\" content=\"Before suspecting air in the bond line as the source of failure, check the adhesive selection, application process, and working environment.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/\" \/>\n<meta property=\"og:site_name\" content=\"Permabond\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/permabondEA\/\" \/>\n<meta property=\"article:published_time\" content=\"2009-10-29T12:56:35+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-07-18T12:46:08+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"450\" \/>\n\t<meta property=\"og:image:height\" content=\"250\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Laurie Gibbons\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@PermabondEA\" \/>\n<meta name=\"twitter:site\" content=\"@PermabondEA\" \/>\n<meta name=\"twitter:label1\" content=\"Verfasst von\" \/>\n\t<meta name=\"twitter:data1\" content=\"Laurie Gibbons\" \/>\n\t<meta name=\"twitter:label2\" content=\"Gesch\u00e4tzte Lesezeit\" \/>\n\t<meta name=\"twitter:data2\" content=\"3\u00a0Minuten\" \/>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Air entrapment in adhesive bonds | Adhesive Failure","description":"Before suspecting air in the bond line as the source of failure, check the adhesive selection, application process, and working environment.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/","og_locale":"de_DE","og_type":"article","og_title":"Help! I\u2019ve got air in the bond line!","og_description":"Before suspecting air in the bond line as the source of failure, check the adhesive selection, application process, and working environment.","og_url":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/","og_site_name":"Permabond","article_publisher":"https:\/\/www.facebook.com\/permabondEA\/","article_published_time":"2009-10-29T12:56:35+00:00","article_modified_time":"2023-07-18T12:46:08+00:00","og_image":[{"width":450,"height":250,"url":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","type":"image\/jpeg"}],"author":"Laurie Gibbons","twitter_card":"summary_large_image","twitter_creator":"@PermabondEA","twitter_site":"@PermabondEA","twitter_misc":{"Verfasst von":"Laurie Gibbons","Gesch\u00e4tzte Lesezeit":"3\u00a0Minuten"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/#article","isPartOf":{"@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/"},"author":{"name":"Laurie Gibbons","@id":"https:\/\/permabond.com\/de\/#\/schema\/person\/ee2cd0b49e7331ee4adc67eafbdc21f6"},"headline":"Help! I\u2019ve got air in the bond line!","datePublished":"2009-10-29T12:56:35+00:00","dateModified":"2023-07-18T12:46:08+00:00","mainEntityOfPage":{"@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/"},"wordCount":644,"publisher":{"@id":"https:\/\/permabond.com\/de\/#organization"},"image":{"@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/#primaryimage"},"thumbnailUrl":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","keywords":["adhesive system","Adhesives","Industrial Adhesives","Insufficient Adhesive"],"articleSection":["Adhesive Selection and Use","Troubleshooting"],"inLanguage":"de"},{"@type":"WebPage","@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/","url":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/","name":"Air entrapment in adhesive bonds | Adhesive Failure","isPartOf":{"@id":"https:\/\/permabond.com\/de\/#website"},"primaryImageOfPage":{"@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/#primaryimage"},"image":{"@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/#primaryimage"},"thumbnailUrl":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","datePublished":"2009-10-29T12:56:35+00:00","dateModified":"2023-07-18T12:46:08+00:00","description":"Before suspecting air in the bond line as the source of failure, check the adhesive selection, application process, and working environment.","breadcrumb":{"@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/#breadcrumb"},"inLanguage":"de","potentialAction":[{"@type":"ReadAction","target":["https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/"]}]},{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/#primaryimage","url":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","contentUrl":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/11\/Permabond-Default-1.jpg","width":450,"height":250},{"@type":"BreadcrumbList","@id":"https:\/\/permabond.com\/de\/help-ive-got-air-in-the-bond-line-causing-adhesive-failure\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/permabond.com\/de\/"},{"@type":"ListItem","position":2,"name":"Help! I\u2019ve got air in the bond line!"}]},{"@type":"WebSite","@id":"https:\/\/permabond.com\/de\/#website","url":"https:\/\/permabond.com\/de\/","name":"Permabond","description":"Permabond","publisher":{"@id":"https:\/\/permabond.com\/de\/#organization"},"alternateName":"Permabond Engineering Adhesives","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/permabond.com\/de\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"de"},{"@type":"Organization","@id":"https:\/\/permabond.com\/de\/#organization","name":"Permabond Engineering Adhesives","alternateName":"Permabond","url":"https:\/\/permabond.com\/de\/","logo":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/permabond.com\/de\/#\/schema\/logo\/image\/","url":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/09\/permabond-logo-BLUE-1.png","contentUrl":"https:\/\/permabond.com\/wp-content\/uploads\/2022\/09\/permabond-logo-BLUE-1.png","width":1371,"height":243,"caption":"Permabond Engineering Adhesives"},"image":{"@id":"https:\/\/permabond.com\/de\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/permabondEA\/","https:\/\/x.com\/PermabondEA","https:\/\/www.linkedin.com\/company\/permabond-engineering-adhesives"]},{"@type":"Person","@id":"https:\/\/permabond.com\/de\/#\/schema\/person\/ee2cd0b49e7331ee4adc67eafbdc21f6","name":"Laurie Gibbons","image":{"@type":"ImageObject","inLanguage":"de","@id":"https:\/\/secure.gravatar.com\/avatar\/ef30a45eda5c8ff1e3f4c6288df66f8a58ab5b054fecced621a7c58e0e6fe4ba?s=96&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/ef30a45eda5c8ff1e3f4c6288df66f8a58ab5b054fecced621a7c58e0e6fe4ba?s=96&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/ef30a45eda5c8ff1e3f4c6288df66f8a58ab5b054fecced621a7c58e0e6fe4ba?s=96&r=g","caption":"Laurie Gibbons"},"description":"Laurie has worked in the adhesive industry for over 30 years. With backgrounds in formulating, technical support, quality, sales, management, and marketing, her well-rounded experience supports Permabond clients and the Permabond team.","jobTitle":"Business Development Manager"}]}},"_links":{"self":[{"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/posts\/1771","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/comments?post=1771"}],"version-history":[{"count":0,"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/posts\/1771\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/media\/11855"}],"wp:attachment":[{"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/media?parent=1771"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/categories?post=1771"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/permabond.com\/de\/wp-json\/wp\/v2\/tags?post=1771"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}